This document is slightly outdated. FIXME: Texture resolutions should have more guidance, contains HiFi hosted resources
Avatar Standards Guide
This document outlines the standards you should follow when creating your avatar. Your avatar uses bones to animate the character's limbs and define the scale variable of limbs. You can add custom bones to further adjust the avatar's shape. Customization of your avatar can be fine-tuned using blendshapes to animate the face and scripting to define advanced behaviors.
Sur cette Page :
As we delve deeper into creating custom avatars, we may use terminology that you are unfamiliar with. Here are some terms you might come across:
Avatar - A virtual representation of a person or NPC.
Mesh - The collection of 3D vertices and triangles for the avatar model. Without this, the avatar is invisible.
Bones - A component of a skeleton that defines a "limb" such as an arm, leg, etc. Each bone may be animated as a separate limb in your avatar.
Skeleton - A hierarchy of joints.
Rigging - The process of creating a skeleton of the avatar model.
Blendshapes - Variations of the topology that defines how the mesh is modified to create various "shapes".
FST file - The main avatar file, which contains information about the skeleton, blendshapes, FBX file and textures used by an avatar.
For the Reference pose, use a T-Pose which complies with the specifications below. You may wish to refer to the properly configured example avatar fbx with source files.
The character must face along the positive direction of the Z-axis.
The arms must be spread along the X-axis. The left arm should therefore be pointing along the positive direction of the X-axis.
The top of the character's head must be up, in the positive direction of the Y-axis.
The character's hands are flat, palms facing the ground, with the thumbs parallel to the X axis.
The character's feet need to be perpendicular to the legs (with the toes pointing along the Z-axis as shown). The feet must not be rotated around the Y-axis (meaning the toes of the left foot should not point inward toward the right leg or outward away from the right leg).
You can download the standard Vircadia skeleton here. This skeleton conforms to the specifications above.
The standard humanoid skeleton of your avatar should follow HumanIK Skeleton with some modifications made for Mixamo. This skeleton system will work with the input systems already in place in Vircadia, and will allow users to use their input devices to control their avatar's arm and finger movements (if they have any).
Vircadia avatars should match the following standard skeletal structure. Each of these joints can be animated.
Finger #1 is not the metacarpal; instead, it is the first joint between the proximal and intermediate.
flow prefixes are reserved for flow bones, such as clothing, hair and tails. These bones should not be animated by an animator.
(Many thanks to Akazukin for the model Ouka Miko(櫻歌ミコ) used in this diagram!)
For example, consider a full cape that surrounds the avatar:
simBackCape# - additional bone(s) of the cape, center back
simFrontCape1 - first bone of the cape, center front
simFrontCape# - additional bone(s) of the cape, center front
simLeftCape1 - first bone of the cape, left
simLeftCape# - additional bone(s) of the cape, left
simRightCape1 - first bone of the cape, right
simRightCape# - additional bone(s) of the cape, right
Alternatively, you can use the
flow prefix, separating the name and joint number with an underscore. The same cape as above would look like:
The look-at vectors are driven by the z-vector of the eye joints.
The +z axis of the eye joints should go through the center of the pupil, and should continue to do so as the eye joint is rotated.
The eye joints are defined in the FST.
Vircadia uses blendshapes to animate your avatar's face. Blendshapes allow you to specify a new state for your avatar's mesh, and facial positions are animated by moving between the different states of your avatar's expressions. Blendshape behaviors are defined in your avatar's FST file, and are added to the avatar mesh using a 3D modeling tool like Blender (Shape Keys) or Maya. Adobe's Fuse program and Mixamo pipeline allow you to export blendshapes as part of your FBX, but if you are modeling an avatar from scratch, you will likely need to specify your own facial expressions.
Vircadia avatars support a number of blendshapes for creating different facial expressions.
EyeBlink_L: Blinking action for the left eye.
EyeBlink_R: Blicking action for the right eye.
JawOpen: Opening of the jaw.
These blendshapes are used when you speak.
Your eyebrows are blendshapes that react to a change in volume. They will move upwards when your voice gets louder. These include:
BrowsU_C: Center of the brow going up
BrowsU_L: Outside corner of the left brow going up
BrowsU_R: Outside corner of the right brow going up
Other audio blendshapes are randomly mixed when you speak. These include:
MouthSmile_L: Left side of the mouth lifting up to a smile
MouthSmile_R: Right side of the mouth lifting up to a smile
LipsFunnel: Funneling of the lips, as when you say "Oh!"
LipsUpperClose: Upper lips rolled inwards
To ensure that the top of the eyelid rests on the iris, blendshapes are used to track the current position of the eye along with your head orientation.
EyeBlink_L: Blinking action for the left eye
EyeBlink_R: Blicking action for the right eye
EyeOpen_L: Opening of left eye
EyeOpen_R: Opening of right eye
BrowsD_L: Outside corner of the left brow moving down
BrowsD_R: Outside corner of the right brow moving down
We apply a small procedural offset to the blendshape coefficients to prevent sleepy or crazy eye lids:
If you are looking straight ahead: The
EyeOpencoefficients will be
If your eyes begin to look upward:
BrowsUstart changing in value, reaching the values of
16.3degrees. This will have the effect of raising your lids and brows as you look upward.
If your eyes begin to look downward:
EyeOpenstart changing in value.
EyeBlinkreaches a value of
EyeOpenwill reach a value of
0.5at 27 degrees. This will have the effect of lowering your lids as you look downward.
Tweaks to your blendshapes can be made with a 3D modeling tool, or directly in your avatar's FST file. In the FST file, blendshapes are defined with the syntax:
Here is an example of modifying your blendshapes in your FST file:
bs = BrowsU_C = head_BS_brow_up = 0.3
bs = BrowsU_R = head_BS_brow_up = 0.3
bs = BrowsD_R = head_BS_brow_down = 0.5
bs = BrowsD_L = head_BS_brow_down = 0.5
bs = EyeBlink_L = head_BS_L_eye_close = 1
bs = EyeBlink_R = head_BS_R_eye_close = 1
bs = EyeOpen_L = head_BS_L_eye_open = 1
bs = EyeOpen_R = head_BS_R_eye_open = 1
bs = JawOpen = JawOpen = 1
bs = MouthSmile_R = head_BS_L_smile = 0.6
bs = MouthSmile_L = head_BS_R_smile = 0.6
bs = LipsFunnel = head_BS_oo = 0.5
bs = LipsUpperClose = head_BS_mouth_down = 0.1
ReadyPlayerMe blendshapes are converted into Vircadia blendshapes automatically.
To utilize blendshapes present on avatars, they must match the blendshapes below. Alternatively, an .fst file can be used to remap the blendshapes to any of the ones below.
Mouth, Cheek and User Blendshapes
Content creators will have limited bandwidth on servers (read small print on any unlimited host plans) so optimization is important, for both the end users and content creators. The more polygons and larger textures you use, the more bandwidth you are using from your servers per load. Optimally, keep your avatar models under 20 MB.
Nous vous recommandons d'essayer de maintenir la taille totale de toutes les textures par avatar en dessous de 8 MB. Elles doivent toujours être inférieures à 1024x1024, sauf si toutes les textures sont dans un seul fichier. Si vous utilisez plusieurs fichiers de textures, il est préférable de les réduire, surtout si vous pouvez les rendre plus petites. N'oubliez pas que vous pouvez obtenir beaucoup plus de détails grâce à la rugosité et au mappage normal, qu'avec de simples textures. Il est conseillé de conserver l'albédo à une taille inférieure à la rugosité pour obtenir le meilleur détail par réflexion de la lumière plutôt que par variation des couleurs.
Avatar Collision Hulls
When you wear different avatars, you'll notice that each avatar has a different collision shape or collision hull. The collision hull is the invisible area around your avatar that is used to used to detect when other avatars or entities collide with you.
Depending on the avatar's design, the collision hulls can be very large or small. This occurs because Vircadia analyzes the shape of the avatar's torso (from hips to head) and tries to find the best shape that encloses the mesh. For example, if your avatar has large hips or perhaps a fully extended tail, Vircadia thinks that the tip of the tail is part of your hips, and makes a very large collision hull. To reduce the size of the collision hull, you can add skeleton joints to your avatar's tail.
The Avatar app will look for a thumbnail with a .jpg extension with the same name and at the same URL location as your avatar's.
For example, if your avatar is hosted at
https://vircadia.dev/avatar.fbx, then it will look for a thumbnail at